|
Custom
Collars
Rhinestone Collars
~ Leather & Steel
Collars ~ O
Rings
|
Thank you for your interest in a custom collar.
There are thousands of possibilities! We have outlined some of the things you
will need to decide on when you have us construct a custom collar.
When taking a neck measurement you should use a FABRIC tape measurer. Measure around the neck snug,
but not so that it pinches any skin. This gives us the center hole. On each side
of the center hole there will be another hole 1" away from center hole. You
may ask for an additional hole to each side.
Click here to measure for O ring Collars
This is a custom item and there are no returns, exchanges or refunds.
Please review
the possibilities then send us a detailed e-mail of your desires so that
we may send you a quote. E-Mail customerservice@fetishflair.net
-
We need to know the
neck measurement
-
Finished leather height of collar (do not
include any for lining to show)
-
Type of leather of the
collar
-
Color of leather,
-
If there is to be
lining, type of lining (suede, fleece, rabbit)
-
If there is to be
lining, color of lining
-
Should lining extend
past collar leather so that it shows
-
Type of buckle
-
Color of hardware
(brass or silver - in some cases gold)
-
Do you want any extras
such as Rhinestones - what color - how many
-
Stamping - style
height - paint inlay color - letters to be stamped
-
Heat pressing -
colors, fonts, images
We can do matching cuffs - let us know if you would like a quote for cuffs.
|
Suede
Colors
Black
Red
White
Orange
Pastel Blue
Navy
Kelly Green
Pastel Pink
Yellow
Purple
Brown
Tan
|
Leather
Colors
Black
Foiled Purple
Foiled Blue
Foiled Pink
Pastel Pink
Red
Mahogany
Light Blue
Navy Blue
Yellow |
Exotics
Leathers
Most Exotic leather must be lined
Python Skin
Black Cobra Skin
Rattle Snake
Pig Skin - very soft
Embossed Ostrich Grain - Black
Embossed Ostrich Grain - Dk Tan
Embossed Alligator Grain - Black
White Deerskin (soft)
Black Deerskin (soft)
White Elk Skin (very soft) |
Buckle Choices
Regular Buckle
Locking Buckle
Rhinestone Buckle
Slip D rings |
Extra
Spikes
Studs
Rhinestones
Hot Fix Pearls
|
Lining
Suede - See above for colors
Note if suede should show
Fleece - natural collar/dyed black
Rabbit |
One centered D ring, drop D or O ring usually
indicates a slave. Three D rings indicates submissive.
D Rings, triangles, triangles with circles, and such
are all placed on the collar by overlaying a small piece of leather so
that the leather can be riveted to the leather of the collar. This small
piece can be of the same color of the collar or a contrasting color
(perhaps the same as the extended lining).
Stamp shown on Natural Vegetable
Oiled Leather
For stamping to appear on black or dyed leather a leather paint is dripped
into stamp recess and then excess paint is rubbed off. Gives a nice used
look. This will be sealed using leather lacquer to extend the life.
Stamping does eventually smooth out and the color will eventually fade.
Suede, Exotic and Foil leathers cannot be stamped. Leather can be a regular weight, belt weight or black latigo(thick).
 |
 |
Stamping available
on
3/4", one inch , one1/2", two inch
height collars |
| Heat Pressing is done on a smooth grain leather.
Hot press image is sealed with leather lacquer. There may not be
any rivets or rhinestones going thru the hot press image. Hot
fix rhinestones and pearls may be used.
Heat Press image will eventually crack or flake. Almost any
image can be a heat pressed onto the leather. There are a
variety of colors and fonts available.
Hot Press Colors
Red
Black
White
Orange
Pastel Blue
Navy
Lime
Green
Pastel Pink
Hot Pink
Dark Pink
Sun Yellow
Purple
Brown |
 |
E-Mail customerservice@fetishflair.net
with the details of your desired collar.
We can do matching cuffs - let us know if you would like a quote for
cuffs
|
